Editorial Type:
Article Category: Research Article
 | 
Online Publication Date: 01 Apr 2019

Production of a Piece of Custom-Made Abutment Screwdriver: Technique and Case Report

DDS, PhD,
DDS,
DDS, PhD,
DDS, and
DDS, PhD
Page Range: 133 – 138
DOI: 10.1563/aaid-joi-D-18-00178
Save
Download PDF

Crown fractures, framework fractures, and abutment screw loosening or screw fracture are examples of mechanical implant failures. Abutment screw loosening is a serious problem that can result in abutment screw fractures. This clinical report describes the production method of a custom-made abutment screwdriver piece for a patient with abutment screw loosening.

<bold>
  <sc>Figures 1–4</sc>
</bold>
Figures 1–4

Figure 1. Radiographic view of the marginal discrepancy. Figure 2. (a) Intraoral view of gingival irritation. (b) The abutment and the removed crown. Figure 3. Designed coping. Figure 4. Plastic coping.


<bold>
  <sc>Figures 5 and 6</sc>
</bold>
Figures 5 and 6

Figure 5. (a) Adaptation of casting wax. (b, c) Modeling of combined plastic coping and adapted wax. (d) The screwdriver and the wax model for intermediate piece. Figure 6. (a) The intermediate piece prepared for casting. (b) Lateral view of the cast. (c) Top view of the cast. (d) The screw driver and the produced cast intermediate piece.


<bold>
  <sc>Figures 7–10</sc>
</bold>
Figures 7–10

Figure 7. (a) Intraoral view of the temporary restoration. (b) View of periodontal healing. Figure 8. View of piece of the custom-made screwdriver. Figure 9. Intraoral view of the definitive implant-supported metal-ceramic restoration. Figure 10. Radiographic view of the definitive restoration.


Contributor Notes

Corresponding author, e-mail: sezgis@pau.edu.tr; sezgi_sdu@hotmail.com
  • Download PDF