Editorial Type:
Article Category: Other
 | 
Online Publication Date: 01 Dec 2012

Buccal Bone Plate Remodeling After Immediate Implant Placement With and Without Synthetic Bone Grafting and Flapless Surgery: Radiographic Study in Dogs

DSc,
DSc,
DSc,
DSc,
DSc,
DSc,
DSc, and
DSc
Page Range: 687 – 698
DOI: 10.1563/AAID-JOI-D-10-00176
Save
Download PDF

Recent studies in animals have shown pronounced resorption of the buccal bone plate after immediate implantation. The use of flapless surgical procedures prior to the installation of immediate implants, as well as the use of synthetic bone graft in the gaps represent viable alternatives to minimize buccal bone resorption and to favor osseointegration. The aim of this study was to evaluate the healing of the buccal bone plate following immediate implantation using the flapless approach, and to compare this process with sites in which a synthetic bone graft was or was not inserted into the gap between the implant and the buccal bone plate. Lower bicuspids from 8 dogs were bilaterally extracted without the use of flaps, and 4 implants were installed in the alveoli in each side of the mandible and were positioned 2.0 mm from the buccal bone plate (gap). Four groups were devised: 2.0-mm subcrestal implants (3.3 × 8 mm) using bone grafts (SCTG), 2.0-mm subcrestal implants without bone grafts (SCCG), equicrestal implants (3.3 × 10 mm) with bone grafts (ECTG), and equicrestal implants without bone grafts (ECCG). One week following the surgical procedures, metallic prostheses were installed, and within 12 weeks the dogs were sacrificed. The blocks containing the individual implants were turned sideways, and radiographic imaging was obtained to analyze the remodeling of the buccal bone plate. In the analysis of the resulting distance between the implant shoulder and the bone crest, statistically significant differences were found in the SCTG when compared to the ECTG (P = .02) and ECCG (P = .03). For mean value comparison of the resulting linear distance between the implant surface and the buccal plate, no statistically significant difference was found among all groups (P > .05). The same result was observed in the parameter for presence or absence of tissue formation between the implant surface and buccal plate. Equicrestally placed implants, in this methodology, presented little or no loss of the buccal bone. The subcrestally positioned implants presented loss of buccal bone, even though synthetic bone graft was used. The buccal bone, however, was always coronal to the implant shoulder.

Copyright: 2012
<bold>
  <sc>Figure 1</sc>
</bold>
.
Figure 1 .

(a) Initial aspect of the mucosa and tooth. (b) Root's section. (c) Socket after tooth extraction. (d) Immediate implants. (e) Gap (2.0 mm) between the implant and the buccal bone plate. (f) The transfers positioned.


<bold>
  <sc>Figure 2</sc>
</bold>
.
Figure 2 .

(a) The bone graft in the gap. (b) The bone graft in the socket. (c) Sutured wound. (d) Prosthesis in place 1 week following surgical procedure.


<bold>
  <sc>Figure 3</sc>
</bold>
.
Figure 3 .

(a) The hemimandible sectioned. (b) The radiographic aspects of the implants. (c) The section between the implants. (d) The buccolingual aspects of the implant sectioned (radiographs were taken from the proximal sides).


<bold>
  <sc>Figure 4</sc>
</bold>
.
Figure 4 .

(a) Measurement of the distances between the implant shoulder and the bone crest level (IS-BC). (b) The resulting linear distance from the highest point between the implant surface and the buccal bone wall (GAP-L). (c) Measurement of the radiolucent area within the gap between the implant surface and the buccal wall (GAP-A).


<bold>
  <sc>Figure 5</sc>
</bold>
.
Figure 5 .

(a) The radiographic aspects of the buccal bone wall (lightly above the implant shoulder, IS) and the gap (G) filled with synthetic bone graft (SBG) in the ECTG group. (b) The radiographic aspects of the buccal bone wall (with a little loss) and the gap (G) in the ECCG group. (c) The radiographic aspects of the buccal bone wall (above the implant shoulder, IS) and the gap (G) filled with SBG in the SCTG group. (d) The radiographic aspects of the buccal bone wall (lightly above the implant shoulder, IS) and the gap (G) in the SCCG group.


Contributor Notes

Corresponding author, e-mail: novaesjr@forp.usp.br
  • Download PDF